Injekcinis skiedinys tūtelėje 360 ml
Tipas FIS V Plus 360 S
Prekės Nr. 7205202
EAN 4012197506735


Prekės Nr. / Tipas
7205202 / FIS V Plus 360 S
Mažiausia pakuotė: 1 Vienetas
1Vienetas
Vienetas
Aprašymas
Stireno neturintis vinilo esterio hibridinis skiedinys, skirtas didelių apkrovų tvirtinimui be plėtimosi, naudojant srieginius inkarinius strypus. „Side-by-side“ („Shuttle“) tūbelė su statiniu maišikliu FIS MR P, skirta dirbti su „ FIS DM S Pro“ tipo išspaudimo prietaisu.
Europos techninis įvertinimas įtrūkusiam ir neįtrūkusiam betonui, taip pat mūrui. Gaisrinės saugos techninių charakteristikų vertės veikiant tempimo ir skersinei apkrovai gaisro, trunkančio iki 120 minučių, atveju.
Įmontavimo temperatūra apdorojant: nuo -10°C iki +40°C.
The injection mortar hasva European Technical Assessment (ETA) for cracked and uncracked concrete, as well as for masonry of full or hollow brick. The mortar is earthquake-proof according to performance category C1 and approved in terms of fire protection for concrete and masonry with the fire -resistance class up to 120 minutes.
The injection mortar is applied with the pressing gun, type VM-P 345 Profi, or with a standard silicone press.
The substrate temperature during processing must be –10 °C to +40 °C (concrete) and the ambient temperature after complete hardening –40 °C to +120 °C (in concrete).
The mortar will keep for at least 18 months if stored in a dark, cool and dry place.
Europos techninis įvertinimas įtrūkusiam ir neįtrūkusiam betonui, taip pat mūrui. Gaisrinės saugos techninių charakteristikų vertės veikiant tempimo ir skersinei apkrovai gaisro, trunkančio iki 120 minučių, atveju.
Įmontavimo temperatūra apdorojant: nuo -10°C iki +40°C.
The injection mortar hasva European Technical Assessment (ETA) for cracked and uncracked concrete, as well as for masonry of full or hollow brick. The mortar is earthquake-proof according to performance category C1 and approved in terms of fire protection for concrete and masonry with the fire -resistance class up to 120 minutes.
The injection mortar is applied with the pressing gun, type VM-P 345 Profi, or with a standard silicone press.
The substrate temperature during processing must be –10 °C to +40 °C (concrete) and the ambient temperature after complete hardening –40 °C to +120 °C (in concrete).
The mortar will keep for at least 18 months if stored in a dark, cool and dry place.
Techniniai duomenys
Techniniai duomenys
| Pristatymo forma | Flakonas |
|---|---|
| Turinys | 360 ml |
| Permatomas | ne |
| Sukietėjimo procesas | 2 komponentų |
| Klijų naudojimas | Statyba / montavimas |
| Su teptuku | ne |
| Dydis | 247,1 x 69,8 |
| Medžiaga | Specialus tinkas |
| Spalva | pilka / ruda |
Priedai
Sistemos priedai
Prekė
Tipas
Prekės Nr.
Kiekis
Atsisiuntimai
0 Pasirinkti
Duomenų lapas (2)
Deklaracijos (2)
Sertifikatai (3)
Prekių nuotraukos (1)
Tipai
Tipas
Prekės Nr.
FIS V Plus 360 S
7205202
FIS V Plus 360 S
Prekės Nr.
7205202






